SkLO

Symmetrical downward curving arms hold glass diffusers of handblown Czech glass. Suspended on a rigid brass tube stem. The glass diffusers are available in three shapes and in both “dipped” glass, featuring the SkLO double-dipped flame-polished mouth and “textured” glass, featuring a soft, frosted finish and subtle sculpted vertical ridges.

Specify overall drop length - Rigid brass tube stems are not field adjustable.

Lengths over 152 cm available at additional cost.

Sockets: 220-240V G9 7W Max.

LED bulbs included.

Standard canopy does not accommodate sloped ceilings or swagging of this light - other canopy options are available at additional cost.

Made in Czech Republic.

Minimal double-sided vessels composed of two different shapes in different transparent colors. Each half of each shape is a different diameter and proportion, with hemispherical ends joined dynamically together just where the two curves meet. The open ends are cut and polished so that the vessels can be oriented with either end up. Six unique shapes, in a bright palette of carefully combined colors. Handblown in the Czech Republic. Six unique shapes, colors available only as shown. All glass dimensions are approximate – handblown glass dimensions vary by nature and intent. Made in the Czech Republic.

DIMENSIONS.

Shape 1. H: 290 x Ø: 150 mm.

Shape 2. H: 610 x Ø: 150 mm.

Shape 3. H: 760 x Ø: 230 mm.

Shape 4. H: 460 x Ø: 120 mm.

Shape 5. H: 310 x Ø: 150 mm.

Shape 6. H: 250 x Ø: 230 mm.

A large dome of handblown Czech glass with a frosted finish rests atop a custom base made of vertical solid brass plates. A brass ring fits onto the base as a seat for the glass dome. Imposing in size, it can work on large furniture, or the floor, depending on the decor. While large, the softness of the frosted glass and minimal presence of the base make it approachable and compelling.

Certification: CE, EAC, CB

Socket: 220-240V E27 60W Max.

LED bulb included.

1800 mm. black fabric-wrapped cord with in-line switch. All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

Large domes of handblown Czech glass with a frosted finish are suspended on lengths of oversized brass chains. An exposed fabric-wrapped electrical cord runs through the chain from canopy to light.

Certification: CE, EAC, CB

Socket: 220-240V E27 60W Max

LED bulb included.

Accommodates sloped ceilings.

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

A flattened sphere of lit, handblown glass centered on a circular canopy, Dot 1x is minimal in form but offers a variety of colour options. The glass diffuser is available in 9 different opague colours, including white. With a total depth of 4" or less.

Socket 120V G9 7W Max.

LED bulb included.

Requires recessed electrical box for installation.

Fixtures weight (approximate) 1 kg.

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic

Spheres of handblown Czech glass with molten, organically shaped open mouths on the underside. Suspended on rigid brass tube stems, the Float Pendants are blown without the use of moulds, so that the spherical shades are intentionally imperfect in their form. These details allow for the minimal design to show its handmade nature – no two exactly alike. Two glass sizes available: 250 & 410 mm.

Certification: CE, EAC, CB.

Drop length: Specify overall drop length - Rigid brass tube stems are not field adjustable.

Minimum overall drop length: 560 mm.

Lengths over 1350 mm. available at additional cost.

LED bulb included.

Standard canopy does not accommodate sloped ceilings or swagging of this light - other canopy options are available at additional cost.

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

Large spheres of handblown Czech glass suspended on rigid brass stems. Two glass sizes available. A custom brass socket assembly through one side holds the light bulb and is connected to the canopy at the ceiling with a length of exposed fabric-wrapped electrical cord. Each glass sphere is blown by hand without the use of moulds, and so is slightly imperfect in shape. Two brass thumb screws attach the removable bulb-and-socket from the side of the glass.

Certifications: CE, EAC, CB.

Socket: 220-240V E27 60W Max.

Drop length: Specify overall drop length - Rigid brass tube stems are not field adjustable.

Minimum overall drop length: 735 mm.

Lengths over 1730 mm. available at additional cost.

Fabric-wrapped electrical cord length will be supplied based on overall drop length specified - field adjustable.

LED bulb included.

Standard canopy does not accommodate sloped ceilings or swagging of this light - other canopy options are available at additional cost.

Large spheres of handblown Czech glass suspended on rigid brass stems. Two glass sizes available. A custom brass socket assembly through one side holds the light bulb and is connected to the canopy at the ceiling with a length of exposed fabric-wrapped electrical cord. Each glass sphere is blown by hand without the use of moulds, and so is slightly imperfect in shape. Two brass thumb screws attach the removable bulb-and-socket from the side of the glass.

Certifications: CE, EAC, CB.

Socket: 220-240V E27 60W Max.

Drop length: Specify overall drop length - Rigid brass tube stems are not field adjustable.

Minimum overall drop length: 735 mm.

Lengths over 1730 mm. available at additional cost.

Fabric-wrapped electrical cord length will be supplied based on overall drop length specified - field adjustable.

LED bulb included.

Standard canopy does not accommodate sloped ceilings or swagging of this light - other canopy options are available at additional cost.

Glass wall vase that appears to stretch from the hook on which it hangs. Executed in handblown Czech glass and hung from a handmade hook, SkLO Hold Vessels can be functional vases, or sculptural objects, and benefit from being shown in multiple. Handblown, no two Hold Vessels are exactly alike. All glass dimensions are approximate – handblown glass dimensions vary by nature and intent. Made in the Czech Republic.

DIMENSIONS. H: 430 x B: 200 x D: 100 mm.

Chunky oversized chain links sculpted from solid Czech glass. Each link is an open link to allow for reconfiguring. Sold in sets of 2, 3, 4 and 5. Many possibilities for display. Available in clear glass only. All glass dimensions are approximate – handblown glass dimensions vary by nature and intent. Made in the Czech Republic.

DIMENSIONS. L: 240 x B: 150 x D: 45 mm.

The Once Light is a single lit sphere of handblown Czech glass that rests atop a brass ring (included). Available in three sizes. The 110mm and 180mm glass diffusers are available in both “dipped” glass, featuring the SkLO double-dipped flame-polished mouth and “textured” glass, featuring a soft, frosted finish and subtle sculpted vertical ridges. The 250mm diffuser is available in “dipped” glass only.

Certifications: CE, EAC, CB

Socket: 220-240V G9 7W Max.

LED Bulb included.

1800 mm. black fabric-wrapped cord with in-line switch.

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

Rings of lit spheres of handblown glass nestled below a conical form and suspended by a single stem, the forms of the Peak Chandeliers are both playful and elegant. The ceiling canopy is an identical smaller conical shape, mirroring the form of the chandelier. Elevating simple geometric forms, the proportions are everything in the Peak Chandelier, and every detail has been carefully considered. The glass diffusers are available in both “dipped” glass, featuring the SkLO double-dipped flame-polished mouth and “textured” glass, featuring a soft, frosted finish and subtle sculpted vertical ridges.

Certifications: CE, EAC, CB.

Sockets: 220-240V G9 7W Max.

Drop length: Specify overall drop length - Rigid brass tube stems are not field adjustable.

Minimum overall drop lengths: 560mm (LT510) / 610mm (LT511) / 640mm (LT512).

Lengths over the below available at additional cost: 1170mm (LT510) / 1220mm (LT511) / 1270mm (LT512).

LED bulbs included.

Standard canopy does not accommodate sloped ceilings or swagging of this light - other canopy options are available at additional cost.

Fixture weights (approximate): 6,5kg (LT510) / 9,5kg (LT511) / 12,5kg (LT512).

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

The Peak Sconce/Ceiling light is a small conical form which fits against the wall or ceiling supporting a lit handblown glass diffuser. The glass diffusers are available in two shapes and in both “dipped” glass, featuring the SkLO double-dipped flame-polished mouth and “textured” glass, featuring a soft, frosted finish and subtle sculpted vertical ridges.

Certifications: CE, EAC, CB.

Sockets: 220-240V G9 7W Max.

LED bulb included.

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

Cylindrical at the base, the Pinch Vessels transition along their length to an oval shape at the top. Available in 4 sizes and a palette of transparent colors. Perfectly functional, they are also sophisticated minimal objects on their own. Four vessels in four colors, only as shown. All glass dimensions are approximate – handblown glass dimensions vary by nature and intent. Made in the Czech Republic.

DIMENSIONS.

Large. H: 500 x B: 230 mm.

Medium. H: 400 x B: 190 mm.

Small. H: 300 x B: 230 mm.

Mini. H: 180 x B: 110 mm.

Oversized cylindrical vessels of handblown Czech glass, each with a decorative thick rope loop that passes through holes in the glass. The rope loops are permanently joined together with a length of brass tube. Functional, yet the simple detail of the rope elevates this into an object all its own. Note that the rope “handle” is purely decorative, and the vessel is not meant to be lifted by the rope. All glass dimensions are approximate – handblown glass dimensions vary by nature and intent. Made in the Czech Republic.

DIMENSIONS. H: 500 x Ø: 290 mm.

The Stem 1X Table Light is a minimal design featuring a single, 110mm diameter diffuser of handblown Czech glass on a brass stem and base. The glass diffusers are available in both “dipped” glass, featuring the SkLO double-dipped flame-polished mouth and “textured” glass, featuring a soft, frosted finish and subtle sculpted vertical ridges.

DIMENSIONS.

Base: Ø 140 mm. / Kúpull: Ø 110 mm. / Height: 405 mm.

TECHNICAL INFORMATION.

220-240V G9 7W Max.

LED bulbs included.

FINISHES.

Dipped Glass Colour: Clear, New Blue, Olivin, Smoke, White.

Textured Glass Colours: Clear, Neutral Grey, Steel Blue, Whiskey.

Metal Finishes: Brushed Brass, Brushed Nickel, Dark Oxidized, Polished Nickel.

Made in the Czech Republic.

The Stem 1X Sconce/Ceiling is a minimal light suitable for use as a ceiling light or wall light. It consists of a single diffuser of handblown Czech glass on a simple brass socket and canopy. The glass diffusers are available in two shapes and in both “dipped” glass, featuring the SkLO double-dipped flame-polished mouth and “textured” glass, featuring a soft, frosted finish and subtle sculpted vertical ridges.

DIMENSIONS.

Canopy: 100 mm. Ø.

Glass: 155 - 180 mm.

TECHNICAL INFORMATION.

Input voltage: 220-240V.

LED bulb included.

FINISHES.

Dipped glass colours: Clear / New Blue / Olivin / Smokey grey / White.

Textured glass colours: Clear / Neautral Grey / Steel Blue / Whiskey.

Metal finishes: Dark oxidized / Brushed Brass / Brushed Nickel / Polished Nickel.

Made in the Czech Republic.

The Stem 2X Table Light is a minimal design consisting of a pair of 110mm diameter diffusers of handblown Czech glass on a symmetrical armature atop a brass stem and base. The glass diffusers are available in both “dipped” glass, featuring the SkLO double-dipped flame-polished mouth and “textured” glass, featuring a soft, frosted finish and subtle sculpted vertical ridges.

DIMENSIONS.

Base Ø: 140 mm. / H: 405 mm. / W: 330 mm.

TECHNICAL INFORMATION.

Input Voltage: 220-240V, G9 7W Max.

LED bulbs included.

FINISHES.

Glass Colours: Clear, Clear Textured, Neutral Gray Textured, New Blue, Olivin, Smoke, Blue Steel Textured, Whiskey Textured, White.

Metal Finish: Brushed Brass, Brushed Nickel, Dark Oxidized, Polished Nickel.

Made in the Czech Republic.

The Stem 3X Sconce/Ceiling is a minimal light consisting of 3 110mm diameter diffusers of handblown Czech glass on a 3-arm brass structure. Suitable for use as a ceiling light or as a wall light. The glass diffusers are available in both “dipped” glass, featuring the SkLO double-dipped flame-polished mouth and “textured” glass, featuring a soft, frosted finish and subtle sculpted vertical ridges.

DIMENSIONS.

Canopy: 100 mm. / Overall Depth: 245 mm. / Overall Ø: 395 mm.

TECHNICAL INFORMATION.

Input voltage: 220-240V.

G9 7W Max.

LED bulbs included.

FINISHES.

Dipped Glass Colours: Clear, New Blue, Olivin, Smoke, White.

Textured Glass Colours: Clear, Neutral Gray, Steel Blue, Whiskey.

Metal finishes: Brushed Brass, Brushed Nickel, Dark Oxidized, Polished Nickel.

Made in the Czech Republic.

Double-sided vessels composed of tapering conical shapes joined together at their narrowest points. Using moulds to blow the individual glass shapes allows careful control over the exact sizes and proportions of the finished piece. Each half of each unique Taper Vessel is a different transparent color, and the color palette of the entire collection carefully repeats itself to insure multiple vessels always work together as a composition. Each end is open so that the vessels are entirely functional and reversible – the open ends are cut and finish polished. Five unique shapes, colors available only as shown. All glass dimensions are approximate – handblown glass dimensions vary by nature and intent. Made in the Czech Republic.

DIMENSIONS.

Shape 1. H: 250 x Ø: 190 mm.

Shape 2. H: 420 x Ø: 160 mm.

Shape 3. H: 760 x Ø: 300 mm.

Shape 4. H: 620 x Ø: 220 mm.

Shape 5. H: 450 x Ø: 210 mm.

The Twin 1.0 Sconce features a two-tone diffuser of handblown Czech glass made up of two flattened spherical shapes in two colors which are melded together while hot on the glass blowing pipe. The glass is held to a solid brass plate canopy by a brass band that sits between the two spheres. Each sphere is lit from within by its bulb, one in each sphere. For wall mount only – for ceiling applications see the Twin 2.0 Sconce/Ceiling Light. It is strongly recommended that the Twin 1.0 Sconce only be installed in the vertical orientation as shown.

Certifications: CE, EAC, CB.

Sockets: 220-240V G9 7W Max.

LED bulbs included.

Fixture weight (approximate): 2,75 kg.

Requires recessed electrical box or other provision to safely make the electrical connections, see installation instructions for more details.

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

A two-tone diffuser of handblown Czech glass made up of two flattened spherical shapes in two colors which are melded together while hot on the glass blower’s pipe. The glass is held to a solid brass canopy by a brass band that sits at the “waist” between the two spheres. Each sphere is lit from within by its own bulb, one in each sphere. Suspended on two fabric-wrapped electrical cords from a canopy whose shape mimics the geometry of the pendant itself.

Certifications: CE, EAC, CB.

Sockets: 220-240V G9 7W Max.

Cord length: Field adjustable - Standard cord length 1800 mm. - Longer lengths available at additional cost.

LED bulbs included.

Accommodates sloped ceilings.

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

A two-tone diffuser of handblown Czech glass made up of two flattened spherical shapes in two colors which are melded together while hot on the glass blower’s pipe. The glass is held to a solid brass canopy by a brass band that sits at the “waist” between the two spheres. Each sphere is lit from within by its own bulb, one in each sphere. Suspended on two rigid brass tube stems from a canopy whose shape mimics the geometry of the pendant itself.

Certifications: CE, EAC, CB.

Sockets: 220-240V G9 7W Max.

Specify overall drop length - Rigid brass tube stems are not field adjustable.

Minimum overall drop length is 255 mm.

Lengths over 1040 mm. available at additional cost.

LED bulbs included.

Does not accommodate sloped ceilings.

All glass dimensions are approximate - handblown glass dimensions vary by nature and intent.

Made in the Czech Republic.

The View Bowl is created by combining two separate shapes while hot on the glass blower’s pipe. The form of the bowl is pressed against a cylindrical base, the rounded surface of the bowl pushing into the space within the cylinder. The tops and bottoms are then cut and polished. Each View Bowl is made up of two transparent colors, one for the bowl and one for the base, creating a complex color relationship. All glass dimensions are approximate – handblown glass dimensions vary by nature and intent. Made in the Czech Republic.

DIMENSIONS.

Small. H: 220 x Ø: 300 mm.

Large. H: 290 x Ø: 410 mm.