HÚSGÖGN
-
Valerie Objects
Aligned útistóll m örmum hvítur
63,900 kr
Visit product page →DESIGN: Maarten Baas.
DIMENSIONS:
L 56 W 55 H 82 CM
MATERIAL:
Aluminium.
-
Valerie Objects
Aligned útistóll m örmum svartur
63,900 kr
Visit product page →DESIGN: Maarten Baas.
DIMENSIONS:
L 56 W 55 H 82 CM
MATERIAL:
Aluminium.
-
Valerie Objects
Aligned útistóll m örmum gulur
63,900 kr
Visit product page →DESIGN: Maarten Baas.
DIMENSIONS:
L 56 W 55 H 82 CM
MATERIAL:
Aluminium.
-
Valerie Objects
Aligned útistóll hvítur
56,900 kr
Visit product page →DESIGN: Maarten Baas.
DIMENSIONS:
L: 56 x W: 55 x H: 82 cm.
MATERIAL: Aluminium.
-
Valerie Objects
Aligned útistóll gulur
56,900 kr
Visit product page →DESIGN: Maarten Baas.
DIMENSIONS:
L: 56 x W: 55 x H: 82 cm.
MATERIAL: Aluminium.
-
Valerie Objects
Aligned útistóll svartur
56,900 kr
Visit product page →DESIGN: Maarten Baas.
DIMENSIONS:
L: 56 x W: 55 x H: 82 cm.
MATERIAL: Aluminium.
-
Vaarnii
013 Osa útistóll
104,000 kr
Visit product page →TOUGH, TIMELESS, LIMITLESS — 013 OSA OUTDOOR DINING CHAIR
The 013 Osa Outdoor Dining Chair by Henrik Tjaerby for Vaarnii is made from heat-treated pine able to withstand the harshest environmental conditions. Explicitly functional and purposefully elemental in its design, the Osa Chair is intended for use alongside the Osa Outdoor Table, sharing the same proportions and distinctive seating planks. It is tough — designed to survive both wet weather and sun exposure — and reliable: timeless seating from which to enjoy many summers. 'This is a chair with limitless potential that needs little explanation,' says Tjaerby.
Made in Finland from heat-treated Finnish pine (Lunawood ThermoWood®).
KEY FEATURES
- Designer: Henrik Tjaerby
- Material: Heat-treated pine (ThermoWood®) — weather and UV resistant
- Design: Elemental, functional — shares proportions with the Osa Table
- Weathering: Will silver gracefully outdoors over approximately one year
- Durability: Designed to survive wet weather and sun exposure
- Origin: Handcrafted in Finland by expert local makers
SPECIFICATIONS
- Designer: Henrik Tjaerby
- Brand: Vaarnii
- Material: Lunawood ThermoWood® heat-treated Finnish pine (non-toxic, no chemicals)
- Lead time: 8–10 weeks
USE CASES
- Outdoor dining chair on a terrace, patio, or garden
- Pairs naturally with the 013 Osa Outdoor Dining Table and Bench
- Covered outdoor seating in a loggia or pergola
- Hospitality and commercial outdoor settings
CARE & MAINTENANCE
- No treatment required — ThermoWood® is naturally weather-resistant
- Will change colour towards a beautiful silver tone within the first year outdoors — this is expected and desirable
- Clean with water and a soft brush; avoid harsh chemicals
- Dents and scratches are natural — embrace them as signs of outdoor life
ABOUT THE BRAND
Vaarnii is a Finnish design brand built on a singular conviction: that pine, the most abundant wood in Finland's sustainably managed forests, deserves to be taken seriously as a luxury material. Every Vaarnii product is made by a small circle of expert Finnish craftspeople using PEFC-certified, slow-grown timber. The result is furniture of rare honesty — objects that age visibly, gracefully, and with character.
-
Vaarnii
015 Peace skemill
88,000 kr
Visit product page →TOTAL RELAXATION, TOTAL CONTEMPLATION — 015 PEACE FOOTSTOOL
The 015 Peace Footstool by Faye Toogood for Vaarnii is the perfect companion to the Peace Outdoor Lounge Chair. Together, they create a fully reclined position for ultimate relaxation and total contemplation. Built from the same thickly cut and rounded heat-treated boards as the Peace Lounge Chair, the sturdy footstool can also serve as an easy outdoor table when needed. Move it wherever you wish — it is as versatile as it is beautiful.
Made in Finland from heat-treated Finnish pine (Lunawood ThermoWood®).
KEY FEATURES
- Designer: Faye Toogood
- Companion: Designed to pair with the 015 Peace Outdoor Lounge Chair
- Dual function: Footstool and outdoor side table
- Construction: Thickly cut, rounded heat-treated pine boards
- Material: Heat-treated pine (ThermoWood®) — weather and UV resistant
- Origin: Handcrafted in Finland by expert local makers
SPECIFICATIONS
- Designer: Faye Toogood
- Brand: Vaarnii
- Material: Lunawood ThermoWood® heat-treated Finnish pine (non-toxic, no chemicals)
- Lead time: 8–10 weeks
USE CASES
- Footstool paired with the 015 Peace Outdoor Lounge Chair
- Outdoor side table for drinks, books, or objects
- Standalone accent piece on a terrace or patio
- Versatile outdoor furniture that moves wherever needed
CARE & MAINTENANCE
- No treatment required — ThermoWood® is naturally weather-resistant
- Will change colour towards a beautiful silver tone within the first year outdoors — this is expected and desirable
- Clean with water and a soft brush; avoid harsh chemicals
- Dents and scratches are natural — embrace them as signs of outdoor life
ABOUT THE BRAND
Vaarnii is a Finnish design brand built on a singular conviction: that pine, the most abundant wood in Finland's sustainably managed forests, deserves to be taken seriously as a luxury material. Every Vaarnii product is made by a small circle of expert Finnish craftspeople using PEFC-certified, slow-grown timber. The result is furniture of rare honesty — objects that age visibly, gracefully, and with character.
-
Vaarnii
015 Peace úti hægindastóll
378,000 kr
Visit product page →A PERMANENT REFUGE UNDER OPEN SKIES — 015 PEACE OUTDOOR LOUNGE CHAIR
The 015 Peace Outdoor Lounge Chair by Faye Toogood for Vaarnii is pine furniture at its most constructive. With extreme proportions and explicit ergonomics, this uncompromising chair features a low profile that hugs the earth, a high back that provides seclusion and support, and a wide seat with broad armrests for ultimate sitting comfort. Peace nods to the archetypal Adirondack chairs of the past — but it is the generous use of weather-resistant heat-treated pine and its timeless profile that gives Peace its longevity. Destined for a special position under open skies, where it can slowly and beautifully age for generations to come.
Made in Finland from heat-treated Finnish pine (Lunawood ThermoWood®).
KEY FEATURES
- Designer: Faye Toogood
- Form: Low profile, high back, wide seat and broad armrests
- Ergonomics: Extreme proportions designed for ultimate outdoor comfort
- Material: Heat-treated pine (ThermoWood®) — weather and UV resistant
- Inspiration: Archetypal Adirondack chair, reinterpreted in Finnish pine
- Origin: Handcrafted in Finland by expert local makers
SPECIFICATIONS
- Designer: Faye Toogood
- Brand: Vaarnii
- Material: Lunawood ThermoWood® heat-treated Finnish pine (non-toxic, no chemicals)
- Lead time: 8–10 weeks
USE CASES
- Primary outdoor lounge chair on a terrace, patio, or garden
- Pairs with the 015 Peace Footstool for a fully reclined position
- Covered outdoor seating in a loggia or pergola
- A permanent, generational fixture in a garden or outdoor space
CARE & MAINTENANCE
- No treatment required — ThermoWood® is naturally weather-resistant
- Will change colour towards a beautiful silver tone within the first year outdoors — this is expected and desirable
- Clean with water and a soft brush; avoid harsh chemicals
- Dents and scratches are natural — embrace them as signs of outdoor life
ABOUT THE BRAND
Vaarnii is a Finnish design brand built on a singular conviction: that pine, the most abundant wood in Finland's sustainably managed forests, deserves to be taken seriously as a luxury material. Every Vaarnii product is made by a small circle of expert Finnish craftspeople using PEFC-certified, slow-grown timber. The result is furniture of rare honesty — objects that age visibly, gracefully, and with character.
-
Vaarnii
016 Maasto Borðstofustóll m örmum
116,900 kr
Visit product page →AN ODE TO PINE — 016 MAASTO DINING ARMCHAIR
The 016 Maasto Dining Armchair by Ronan Bouroullec for Vaarnii is simple and strong — an ode to pine. Instantly archetypal, it is a hardworking seat for daily dining at home or in public spaces, with a seamless profile and a brutally honest design. Maasto's uncomplicated silhouette is created by combining plywood sides for strength, reduced bulk, and simplicity of construction, with a solid pine seat and back for durability. The Dining Armchair adds plywood arms for maximum seating comfort. Vaarnii's specially made Finnish plywood features an exaggerated grain, producing an intoxicating hyper-pine aesthetic.
Made in Finland from sustainably sourced Finnish pine and pine plywood.
KEY FEATURES
- Designer: Ronan Bouroullec
- Construction: Plywood sides and arms + solid pine seat and back
- Arms: Plywood armrests for maximum seating comfort
- Plywood: Specially made Finnish plywood with exaggerated grain — hyper-pine aesthetic
- Silhouette: Seamless, archetypal, brutally honest
- Origin: Handcrafted in Finland by expert local makers
SPECIFICATIONS
- Designer: Ronan Bouroullec
- Brand: Vaarnii
- Material: PEFC-certified Finnish Scots Pine (seat and back); Finnish pine plywood (sides and arms)
- Lead time: 8–10 weeks
USE CASES
- Primary dining armchair for everyday family meals
- Head-of-table or host chair in a dining setting
- Contract and hospitality seating in restaurants and public spaces
- Pairs with any Vaarnii dining table
CARE & MAINTENANCE
- Wipe clean with a lightly damp cloth; avoid soaking the wood
- Apply natural pine oil or wax annually to nourish the solid pine surfaces
- Dents and scratches are natural — embrace them as signs of a life well lived
- Pine will naturally deepen to a warm honey tone over time
ABOUT THE BRAND
Vaarnii is a Finnish design brand built on a singular conviction: that pine, the most abundant wood in Finland's sustainably managed forests, deserves to be taken seriously as a luxury material. Every Vaarnii product is made by a small circle of expert Finnish craftspeople using PEFC-certified, slow-grown timber. The result is furniture of rare honesty — objects that age visibly, gracefully, and with character.
-
Vaarnii
016 Maasto borðstofustóll án arma
108,900 kr
Visit product page →AN ODE TO PINE — 016 MAASTO DINING CHAIR
The 016 Maasto Dining Chair by Ronan Bouroullec for Vaarnii is simple and strong — an ode to pine. Instantly archetypal, it is a hardworking seat for daily dining at home or in public spaces, with a seamless profile and a brutally honest design. Maasto's uncomplicated silhouette is created by combining plywood sides for strength, reduced bulk, and simplicity of construction, with a solid pine seat and back for durability. Vaarnii's specially made Finnish plywood features an exaggerated grain, producing an intoxicating hyper-pine aesthetic.
Made in Finland from sustainably sourced Finnish pine and pine plywood.
KEY FEATURES
- Designer: Ronan Bouroullec
- Construction: Plywood sides + solid pine seat and back
- Plywood: Specially made Finnish plywood with exaggerated grain — hyper-pine aesthetic
- Silhouette: Seamless, archetypal, brutally honest
- Versatility: Suited to home dining and public/commercial spaces
- Origin: Handcrafted in Finland by expert local makers
SPECIFICATIONS
- Designer: Ronan Bouroullec
- Brand: Vaarnii
- Material: PEFC-certified Finnish Scots Pine (seat and back); Finnish pine plywood (sides)
- Lead time: 8–10 weeks
USE CASES
- Primary dining chair for everyday family meals
- Contract and hospitality seating in restaurants and public spaces
- Pairs with any Vaarnii dining table
- Ideal for Scandinavian, minimalist, or brutalist interiors
CARE & MAINTENANCE
- Wipe clean with a lightly damp cloth; avoid soaking the wood
- Apply natural pine oil or wax annually to nourish the solid pine surfaces
- Dents and scratches are natural — embrace them as signs of a life well lived
- Pine will naturally deepen to a warm honey tone over time
ABOUT THE BRAND
Vaarnii is a Finnish design brand built on a singular conviction: that pine, the most abundant wood in Finland's sustainably managed forests, deserves to be taken seriously as a luxury material. Every Vaarnii product is made by a small circle of expert Finnish craftspeople using PEFC-certified, slow-grown timber. The result is furniture of rare honesty — objects that age visibly, gracefully, and with character.
-
A-N-D
Vector 6 - P
698,900 kr
Visit product page →LIGHT IN SUSPENSION — VECTOR 6 PENDANT
The Vector 6 Pendant is designed by Lukas Peet for his Vancouver-based studio ANDlight. A study in geometric precision and material restraint, the Vector 6 comprises six rectilinear steel sections arranged in vertical orientation, suspended by aircraft cables from a central hub. Light pours into the hollow centre and radiates bidirectionally — illuminating both the inner and outer faces of the fixture simultaneously. The result is a pendant that is as compelling unlit as it is when glowing, functioning equally as sculpture and light source. Made in Canada.
KEY FEATURES
- Designer: Lukas Peet
- Form: Six rectilinear sections in vertical orientation, suspended by aircraft cables
- Light direction: Bidirectional — illuminates inner and outer faces simultaneously
- Dimming: Compatible with phase dimming, 0–10V, and DALI control systems
- Cable: Adjustable cord length up to 244 cm; custom lengths available
- Material: Steel — precision-fabricated
- Origin: Made in Canada
SPECIFICATIONS
- Designer: Lukas Peet
- Brand: ANDlight
- Materials: Steel
- Luminaire dimensions: 58 × 34 cm
- Adjustable cord length: Up to 244 cm (custom length available on request)
- Input voltage: 220–240V
- Dimming: Phase dimming / 0–10V / DALI
- Origin: Made in Canada
USE CASES
- Statement pendant in a double-height living room or loft
- Architectural centrepiece above a dining table or kitchen island
- Gallery or museum lighting with sculptural presence
- Hospitality and commercial interiors requiring DALI or 0–10V dimming
- Complement to minimalist, industrial, or contemporary interiors
- Collector’s lighting for design-forward residential projects
CARE & MAINTENANCE
- Wipe with a soft, dry cloth to remove dust from steel surfaces
- Avoid abrasive cleaners or wet cloths on the finish
- Inspect aircraft cables and connections periodically for safety
- Ensure dimmer compatibility before installation — supports phase, 0–10V, and DALI
ABOUT THE BRAND
ANDlight is a Canadian lighting studio founded by designer Lukas Peet. Based in Vancouver, ANDlight creates lighting objects that sit at the intersection of industrial fabrication and sculptural thinking. Each piece is designed and made in Canada, with a focus on geometric rigour, material honesty, and the expressive potential of light itself.
