Sowden
Lamp PL2
17.900 kr
Sowden
Lamp PL2
17.900 kr
DESIGN: George Sowden.
The SOWDEN Lamp PL2 has been designed and developed with dual functionality - it can be used both as fixed lighting when connected to a power supply with a USB cable, or as a moveable lamp using the Li-ion batteries supplied.
When used as a fixed lighting, which could be on a bedside table, between books on a shelf or on a office desk, the dual functionality allows direct connection to a power supply with a USB cable, and when even if the batteries are not inserted, the lamp will work perfectly.
If used as a moveable lamp, SOWDEN supplies two 18650 2600mAh Li-ion rechargeable batteries making the lamp convenient in places where electrical connections are not easily available - this gives the possibility to take light safely anywhere indoors or outdoors.
Available in two variations, PL2 has three brightness settings, which can be set by gently touching the top of the lamp - full brightness is 250 lumens maximum from our SOWDEN LightDisc 01.
The two 18650 2600mAh Li-ion rechargeable batteries are easily fitted and are replaceable whenever needed - they can be swapped with fully charged ones rather than relying on recharging with the USB - for example, in restaurants changing the batteries can be done quickly, and customers are never left in the dark.
The light source is a SOWDEN LightDisc 01, and the two 18650 2600mAh batteries are both fully replaceable when required.
It takes approximately four hours to fully charge the batteries.
DIMENSIONS.
Ø: 18 cm. x H: 30,5 cm.
MATERIALS.
Painted aluminium and ABS body, silicone shade.
Related products
-
Vaarnii
1001 Hans Pendant
103.900 kr
Visit product page →DESIGN: Hans-Agne Jakobsson
The warm glow of light filtering through pine veneer combined with an unexpectedly graphic and elemental form is the enduring appeal of these iconic designs by Hans-Agne Jakobsson. When Vaarnii began exploring the use of pine wood in lighting design, it quickly became clear that the iconic designs of Hans-Agne Jakobsson from the 1960’s could not be bettered. Pine is used efficiently; it’s tone and grain are employed to maximum effect in designs that project material mass but boast actual lightness. Vaarnii has re-engineered three of Jakobsson’s pendant designs using solid Finnish pine to support circular strips of high-quality pine veneer, reintroducing these classic 20th century designs to the market after decades of absence.
Handcrafted in Finland.
-
Vaarnii
1002 Hans Pendant
133.900 kr
Visit product page →DESIGN: Hans-Agne Jakobsson
The warm glow of light filtering through pine veneer combined with an unexpectedly graphic and elemental form is the enduring appeal of these iconic designs by Hans-Agne Jakobsson. When Vaarnii began exploring the use of pine wood in lighting design, it quickly became clear that the iconic designs of Hans-Agne Jakobsson from the 1960’s could not be bettered. Pine is used efficiently; it’s tone and grain are employed to maximum effect in designs that project material mass but boast actual lightness. Vaarnii has re-engineered three of Jakobsson’s pendant designs using solid Finnish pine to support circular strips of high-quality pine veneer, reintroducing these classic 20th century designs to the market after decades of absence.
Handcrafted in Finland
-
Vaarnii
1002 Hans pendant XL
244.900 kr
Visit product page →DESIGN: Hans-Agne Jakobsson.
Big, brazen, and a whole lot of pine, the Hans Pendant XL delivers a substantial dose of iconic design. After re-engineering Hans-Agne Jakobsson’s characteristic sixties lighting, Vaarnii understood that the designs innovative lightweight construction could be extended even further. The super-sized Hans Pendants uses the same concentric circles of veneer and sophisticated interior structure of solid Finnish pine as their smaller-sized siblings but tests the limits of lighting manufacture with their scale. More softly filtered light, more pine surface, more imposing, the 70 cm 1002 Hans Pendant XL brings maximum impact to interior spaces with its brutal scale and metres of finest pine veneer.
The Hans series of lighting is made in Finland using solid pine for internal structure and the finest pine veneer for exterior surfaces. As every light is handmade using a natural material, each object is subject to subtle variations in symmetry. Every Hans light is therefore unique.
Pine is an especially characterful wood. As a result of naturally occurring oils and resins, pine changes colour as it ages. Vaarnii uses both pine heartwood and pine sapwood. These two different types of wood mature at different speeds, resulting in a beautifully stripped surface. This exciting patterning is a temporary stage and should be enjoyed while it occurs. Your Vaarnii pine product will gradually even out to a rich honey tone over the course of several years.
DIMENSIONS.
H: 45 cm. x W: 70 cm.
-
Vaarnii
1003 Hans Pendant
179.900 kr
Visit product page →DESIGN: Hans-Agne Jakobsson
The warm glow of light filtering through pine veneer combined with an unexpectedly graphic and elemental form is the enduring appeal of these iconic designs by Hans-Agne Jakobsson. When Vaarnii began exploring the use of pine wood in lighting design, it quickly became clear that the iconic designs of Hans-Agne Jakobsson from the 1960’s could not be bettered. Pine is used efficiently; it’s tone and grain are employed to maximum effect in designs that project material mass but boast actual lightness. Vaarnii has re-engineered three of Jakobsson’s pendant designs using solid Finnish pine to support circular strips of high-quality pine veneer, reintroducing these classic 20th century designs to the market after decades of absence.
Handcrafted in Finland.
